8
264
Technical Specifications
Engine Data
NOTE:
The technical data, values and specifications in this Owner’s Manual are provided as guidance only. The vehicle specific
data can deviate from the information provided, for example, as a result of optional or special equipment ordered with
the vehicle, vehicle loads, and country specific measurement methods.
Data MC20
Cylinder number and position 6 - 90° V
Number of valves per cylinder 4
Bore x stroke 88 x 82 mm
Total displacement 2992 cm
3
Compression ratio 11 :1
Drive type RWD
Maximum power output (EC)
- corresponding RPM
463 kW - 620 HP
7500 RPM
Peak and overboost torque (EC)
- corresponding RPM
538 ft-lb (730 N-m)
3000-5750 RPM
Engine Properties
Timing The timing system uses two overhead camshafts with timing variator.
Timing system con-
trol
Timing chain.
Supply Turbocharged with turbocompressor and related intercooler for each bank.
Port & Direct Injec-
tion fuel system
High-pressure 5080 PSI (350 bar) direct fuel injection and Low-pressure 87 PSI (6 bar) port fuel
injection. Double ignition with prechamber and digital electronic control system included and
controlled by a single microprocessor ECU.
To Next Page
Loading...
Need help?
General
