Masibust VT7S12E - Table 8 Relay Group - 2 Configuration Detail; Table 9 Relay Group - 4 Configuration Detail; Table 10 Relay as Control Output Configuration Detail

VIBRATION TRANSMITTER-VT7S12E
Ref No: mVTD/om/201
Issue No: 02
User’s Manual - 14 -
If relay group – 2 is selected, there will be two group of relay. Each group has two relays. (G-1 and G-2). G-1 means relay 1,
relay 3 & G-2 means relay 2, relay 4
Example:
Table 8 Relay Group – 2 Configuration Detail
Note : - 1) All Groups cannot be selected for single Channel .
2) None means no group is selected for particular channel.
 Relay Group - 4:
If relay group – 4 is selected, there will be four group of all 4 relays. Each group has one relay. (G -1, G -2, G -3 and G -4). G -
1 means relay 1, G -2 means relay 2, G -3 means relay 3, G -4 means relay 4
Example:
Table 9 Relay Group – 4 Configuration Detail
Note: - 1) More than one Group cannot be selected for single Channel .
2) None means no group is selected for particular Channel.
3) If rL.oP is set to Co then All relay will be assigned channel wise.
 Relay as Control Output:
Whenever rL.oP is set to Co then All relay will be assigned channel wise and all assignments are remain fixed. And Relay
type
Example:
Table 10 Relay as Control Output Configuration Detail
 For Relay functionality Refer Relay outputs (Chapter – 8).
3. LEVEL - 3 :
Pressing MENU key DATA window shows LvL3 (LvL3) message. Press MENU key again DATA window shows pwd (PWD)
message, press increment key twice to select password and then press MENU key to enter into Level-3.Following parameters can
be configured in LEVEL – 3.
LEVEL 3:
Parameter
(DATA Window)
Setting name and description
Default value
Shows only
if
Symbol
Name
pwd
(PWD)
Level-3
Password
0 to 9999
0000
-
CHANNEL NO
NONE
G-1
G-2
Relay Group
Relay Type
1

G – 1
High/ Very High (H-VH) or
Very Low /Low (VL-L) or
Low/High (L-H)
2

G – 2
High/ Very High (H-VH) or
Very Low /Low (VL-L) or
Low/High (L-H)
3

4

CHANNEL
NO
NONE
G -1
G -2
G -3
G -4
Relay Group
Relay Type
1

G - 1
Low ON (L) or High ON (H)
2

G - 2
Low ON (L) or High ON (H)
3

G - 3
Low ON (L) or High ON (H)
4

G – 4
Low ON (L) or High ON (H)
CHANNEL
NO
NONE
G -1
G -2
G -3
G -4
Relay Group
Relay Type
1

G - 1
Low ON (L) or High ON (H)
2

G - 2
Low ON (L) or High ON (H)
3

G – 3
Low ON (L) or High ON (H)
4

G – 4
Low ON (L) or High ON (H)