MASSA-K ?K-TP(FP) - 2.5.3 Weighting of item; 2.5.4 Work with piece item; 2.5.5 Label printing

22 Administrator manual MK-TP(FP) MF (Edition 3) 2011
* Reset item and return to the operating mode by pressing button.
* In operating mode the indicator shows the weight, price and cost of item. To view the name of the
selected item, press and hold button. To view PLU, press button.
2.5.3 Weighting of item
Put the item on the scales. Scales display weight of item, price and cost. For example:
Notes
1 Stop flashing point on the display of “WEIGHT” shows the stability of weight indication is
achieved.
2 Completion of weighing process is accompanied by a short beep, which can be disabled (point
2.4.8).
3 When scales unloaded the indicator of the zero “→ 0 ←” should be lit, otherwise you must press
button.
4 If the weight of the weighed items exceeds the maximum load, the display shows “H”.
When weighing the items into the tare, place tare on the scales. After completion of weighing, press
button. The weight value will reset the indicator “NET” glows. Weight the item into the tare. After
removal of items and tare from weighting plate, scales show weight of tare with a minus sign.
Reset tare is carried out only on the unloaded scales by button, the indicator “NET” disappears.
To set the tare weight manually press and hold button unloaded scales until message “T 0.000”
appears on the indicator “UNIT PRICE”. Enter weight of tare by keypad, press button. The time
interval between clicks of buttons should not exceed 3 seconds.
2.5.4 Work with piece item
After selecting a piece items, on the indicator “WEIGHT” display number of pieces (one), “X” - the
sign of piece items, the price and cost of item, for example:
Set number of pieces of item by digital keyboard (eg, 12). Scales show the cost of the item.
2.5.5 Label printing
There are two label printing modes in scales (point 2.4.2.1):
Auto - printing just after weighting.
Manual - by pressing button.
To print copies of the label in the manual mode press button.
For piece item the number of pieces are printed instead of weight. The print mode “Auto” doesn’t
work.
WEIGHT - kg 0 NET UNIT PRICE - eur/kg TOTAL PRICE-eur
1 . 3 4 0 1 2 0 . 5 0 1 6 1 . 4 7
WEIGHT - kg 0 NET UNIT PRICE - eur/kg TOTAL PRICE-eur
1 x 1 2 0. 5 0 1 2 0 . 5 0
WEIGHT - kg 0 NET UNIT PRICE - eur/kg TOTAL PRICE-eur
1 2
х
1 2 0. 5 0 1 4 4 6 . 00