Administrator manual MK-TP(FP) MF (Edition 3) 2011 41
Data format is described on the CD, included in the delivery.
4.5.5 Work with memory card
Work with memory card is similar to point 2.4.5.
4.5.6 Language setting
By , buttons choose language, press button.
4.5.7 Price Format
Depending on the accepted currency in the country scales have the ability to display the price and
cost in four formats, e.g. 3.20; 0.320; 32.0; 320.
By , buttons choose 0.00; 0.000; 0 or 0.0. Press button.
4.5.8 Sound
Parameter allow or disallow sound some operations by beep.
4.5.9 Adjusting the display
4.5.9.1 Backlight
By , buttons choose required brightness. Press button.
4.5.9.2 Contrast
By , buttons choose required contrast. Press button.
4.6 Seller’s work
4.6.1 Turn scales on
Turn scales on. After completing the test and display the name of the mode “TPS”, you will see
clock on indicator.
Press button, scales will go to operating mode.
* If the mode or the clock is setting not correctly contact the administrator.
4.6.2 Password input
The scales ask for seller’s password after turning on. The seller should enter the password on the
keyboard set by administrator and press button. From this moment, all purchases will be recorded
for this seller, until turning scales off.
N o t e - If the sellers work in simultaneous mode, password is requested during the first registration
of purchase by each button “A”, “B”, “C” or “D”.
Administrator’s password is required during the printing of Z-report.
4.6.3 Setting parameters of item
All items can be divided into two groups: the items are included in the database preprogrammed
items and items not included in the database – non-programmed items.
1 7 / 1 2 / 1 0
1 2
:
52
To Next Page
Loading...