4-13 Control Functions
the select lever is set to position , and
then set the switch to “2WD”.
On-Command Differential Gear Lock
Switch “4WD”/”LOCK”
1. On-Command differential gear lock switch “4WD”/ “LOCK”
2. Select lever
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-drive switch is set to “4WD”,
move the select lever to position
, and then
set the switch to “LOCK”. When the
differential gear is locked, the differential
gear lock indicator light will come on along
with the differential gear lock indicator in the
multifunction meter unit display .To release
the differential gear lock , stop the vehicle
and set the switch to “4WD”.
WARNING
POTENTIAL HAZARD
Riding too fast while the vehicle is in
4WD-LOCK.
WHAT CAN HAPPEN
All wheels turn at the same speed when
the differential is locked, so it takes more
effort to turn the vehicle. The amount of
effort required is greater the faster you
go. You may lose control and have an
accident if you cannot make a sharp
enough turn for the speed you are
traveling.
To Next Page
Loading...
