Massimo MSU 700 - Front and Rear Shock Adjustment

4-25 Control Functions
Front and Rear Shock Adjustment
The spring preload can be adjusted to suit
the operating conditions.
You can reduce preload for a softer ride, or
increase preload if frequent bottoming out of
the UTV occurs.
CAUTION:
Frequent or severe bottoming out of the UTV
can cause increased wear or damage to the
vehicle.
Adjust the spring preload as follows.
To increase the spring preload, turn the
adjusting ring in direction
.
To decrease the spring preload, turn the
adjusting ring in direction
.
1. Spring preload adjusting ring
2. Position indicator
NOTE:
A special wrench can be obtained at a
service center to make this adj
ustment.