Periodic Maintenance and Adjustment 8-48
1. Tail/brake light bulb holder
3. Push the defective bulb in and turn it
counterclockwise to remove it from the
bulb holder.
4. Push a new bulb in and turn it clockwise
to install in the bulb holder.
5. Install the bulb holder（together with the
bulb）by turning it clockwise.
6. Install the panel by installing the quick
fasteners and bolts, and then tighten the
bolts to the specified torque.
Tightening torque:
Panel bolt:
4.7 ft·lbf (6.5N·m, 0.65 m·kgf）
Troubleshooting
Although vehicles receive a rigid inspection
before shipment from the factory, trouble
may occur during operation. Any problem in
the fuel, compression, or ignition systems
can cause poor starting and loss of power.
The troubleshooting chart describes a quick,
easy procedure for making checks. If your
vehicle requires any repair, take it to a
service center.
The skilled technicians at a service center
ship have the tools, experience, and know
how to properly service your vehicle.
Imitation parts may look like genuine parts,
To Next Page
Loading...
