20
20
4.3 READ HOLD
If you need data hold when measuring, you can put on “HOLD”, it will hold
the reading and the showing of the LCD will be locked. If you put the switch
again, data hold is not continuing.
4.4 HAND OPERATING AND TIME MEASURING
In insulation range, the function switch is rotated to “MAUN.”, the meter will
be operated by hand. Once press the test button, the measurement begins; If
there is a long-time measurement, you can press the test button and rotate it
counter clockwise to lock position. The function switch is rotated to “LOCK
1min., LOCK 2min., LOCK 4min.”, then press the green test button, which will
measure timely for one minute, two minutes and four minutes. In this course,
if you want to stop measurement, you can rotate the function switch to
To Next Page
Loading...
