8
8
DC (direct current)
Continuity Buzzer
1.4 MAINTENANCE
1.4.1 Please do not attempt to adjust or repair the meter by removing the rear
case while voltage is being applied. A technician who fully understands
danger involved should only carry out such actions.
1.4.2 Before opening the battery cover of the meter, always disconnect test
leads or test clips from all sources of electric current.
1.4.3 Always set the function switch to the OFF position when the meter is
not in use.
1.4.4 If the meter is to be stored for a long period of time, the batteries should
be removed to prevent damage to the unit.
1.4.5 Do not use abrasives or solvents on the meter, use a damp cloth and
mild detergent only.
To Next Page
Loading...
