4
4
1. SAFETY INFORMATION
This meter has been designed in general to comply with IEC 348 and
according to IEC-1010 concerning about electronic measuring instruments
with an overvoltage category 1000V CAT ΙΙ, 600V CAT Ш and pollution 2.
Follow all safety and operating instructions to ensure that the meter is used
safely and is kept in good operating condition.
Pay attention to cautions and warnings, which will inform you of potentially
dangerous procedures.
WARNING
To ensure safe operation, please follow the directions in this section
carefully.
Electricity can cause severe injuries even with low voltages or currents.
Therefore it is extremely important that you read the following information
before using this Insulation Tester.
To Next Page
Loading...
