6
6
replaced with the same model or same electric ratings.
1.1.6 This meter must only be used by a competent trained person and in
strict accordance with the operator’s manual.
1.2 DURING USE
1.2.1 Never exceed the protection limit values indicated in specifications for
each range of measurement.
1.2.2 When the meter is linked to a measurement circuit, do not touch
unused terminals.
1.2.3 Do not measure voltage if the voltage on the terminals exceeds 1000V
above earth ground.
1.2.4 Always be careful when working with voltages above 60V DC or 30V
AC rms, keep fingers behind the probe barriers while measuring.
1.2.5 Never connect the meter leads across on live circuits while the function
switch is in the insulation resistance, resistance or continuity mode.
To Next Page
Loading...
