29
29
Warning
When checking in-circuit resistance, be sure the circuit under test
has all power removed and that all capacitors have been
discharged fully.
4.9.1 Connect the black test lead to the LOW jack and the red test lead to the
HIGH jack.
4.9.2 Set the function switch on the “200Ω
,1000V , 700V~ “ position.
4.9.3 Set the range switch on the 200Ω range position.
4.9.4 Connect test leads across the resistance under measurement.
4.9.5 You can get reading from LCD.
To Next Page
Loading...
