Master Forge MFX784BDP - Page 22

22
Lowes.com/masterforge
CARE AND MAINTENANCE
Keeptheventilationopening(s)ofthecylinderenclosurefreeandclearofdebris.
Inspecttheamesattheburnerbylookingthroughtheobservingholeonleftsideoftheburnerand
controlunit.Agoodameshouldbebluewithayellowtip1to2inchhigh.Ifamesareexcessively
yellow and irregular, oil residue and food deposits may be collecting on the burner. Try cleaning the
burner surface with hot, soapy water and cleaning the holes with a pipe cleaner to improve the
ames.
Badamesmayalsobecausedbypoorventuriattachmenttotheorice.Turnoffthecontrolknob
and cylinder valve. Always let the smoker cool before cleaning or checking the assembly. Make sure
theoriceofthecontrolvalveproperlymateswiththeburnermixingtubebyvisualobservationfrom
thebottomoftheappliance.Theburnerventuritubeshouldoverlaptheoriceandtheyshouldform
a straight line as shown.
WARNING: Iftheinstructionsabovearenotfollowed,anexplosionmayresult,possiblycausing
serious bodily injury or death.
To protect your smoker from weather conditions, always keep it covered while not in use.
Correct Wrong Wrong
Good Flame
2”
Yellow
Light Blue
Blue
Bad Flame