Master Forge MFX784BDP - Troubleshooting and Warranty; Troubleshooting Common Issues

23
Lowes.com/masterforge
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The burner will not
light using the
igniter procedure.
1. The igniter electrode may be
covered with grease or residue.
2. No spark is being generated.
3.Nogasoworcylindervalvenot
open.
4. Vapor lock at coupling nut to LP
cylinder.
1. Clean the igniter electrode.
2. Check the connection and
reconnect any loose or
disconnected wires
3. Make sure LP cylinder is not empty
or open cylinder valve.
4. Turn off knob and LP cylinder
valve. Disconnect coupling nut
from LP cylinder. Reconnect and
retry.
The burner will not
light with a match.
1.Nogasoworanobstructedgas
ow.
1. Check the fuel level. Clean the
venturi tube and burner.
Theamegoesout. 1 . Disconnected gas supply hose.
2. High or gusting winds.
1. Reconnect the gas supply hose.
2. Move the grill out of the windy
area.
Flare-up. 1.Excessivecookingtemperatures.
2. Grease and residue build-up.
3.Excessivefatinthemeat.
4.Excessiveoilinthemarinade.
1.Reducetheamelevel.
2. Clean the components.
3. Trim fat from the meat before
cooking.
4. Use a non-oil based marinade.
Yellowsootyame. 1.Excessivecookingtemperature.
2.Obstructionofgasow.
3. Ventilation closed. Damper closed.
1.Reducetheamelevel.
2. Check and clean venturi tube and
burner.
3. Adjust ventilation and damper
accordingly.