TECHNICAL SPECIFICATIONS
DC VOLTAGE
Readings are accurate for a period of 1 year after calibration at 64 to
82ºF (18 to 28ºC), with relative humidity up to 75%.
Accuracy specifications take the form of:
± [(% of Reading) + (Number of Least Significant Digits)]
Input Impedance: 10 M
Max. Allowable Input Voltage: 600 V DC
［1］If the voltage being measured is >600 V, the display may show
the value of the voltage, but the measurement is dangerous.
NOTE: The 600 V range is accurate from 20 to 100% of range.
Range
400 mV
4 V
40 V
400 V
600 V
± (0.8% + 5)
“OL” shown on
the display
See［1］± (1.0% + 5)
0.1 mV
1 mV
10 mV
0.1 V
1 V
Resolution Accuracy
Overrange
Indication
model no. 052-0052-2 | contact us 1-800-689-9928
13
TECHNICAL SPECIFICATIONS
To Next Page
Loading...
