To avoid possible damage to the meter or to the equipment under
test, follow these guidelines:
●
●
●
●
●
Disconnect circuit power and discharge all capacitors thorough-
ly before measuring resistance, diode, capacitor, temperature
and continuity.
Use the proper terminals, function and range for your measurements.
Before measuring current, check the meter's fuses and turn off
the power to the circuit before connecting the meter to the circuit.
Before rotating the rotary switch to change functions, disconnect
test leads from the circuit under test.
The meter uses multiple anti-interference designs, but it may
stop working if the interference in the environment is too
intense. Turning on the meter again can solve this problem.
CAUTION
model no. 052-0052-2 | contact us 1-800-689-9928
5
CAUTION
To Next Page
Loading...
