EasyManuals Logo

MasterCraft csx 220 User Manual

MasterCraft csx 220
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
MasterCraft recommends the use of a spiral-cell type battery,
such as the Optima brand. These batteries exceed other batteries in
holding and extending a charge.
Inspect the rottle
and Shift Cables for
Kinks, Wear and In-
terference (RTP-1 and
Twin MCX Installa-
tions Only)
Some engine parts become very hot during operation.
is inspection must be completed while the engine is
cool to prevent burns to your skin. Perform this task be-
fore starting the boat.
Step 1: Ensure the engine is OFF and the engine safety starting
switch disconnected. Be certain that the throttle/shift
control lever is in neutral.
Step 2: Open the engine compartment and locate the throttle and
shift cables. Follow each cable back under the oorboards
and feel for any kinks and wear on the outer jacket. Any sign
of cable damage is cause for replacement. See your autho-
rized MasterCraft dealer’s service department if you notice
any cable damage.
Inspect the
Fuel System for Leaks
This function should be per-
formed prior to starting the engine;
and then again after about three
(3)-to-ve (5) minutes to determine
whether any leaks are apparent.
Step 1: First ensure the
engine is OFF and the engine
safety starting switch is disconnected. Be certain that the
throttle/shift control lever is in neutral. The engine
must be cool.
Gasoline is highly flammable and its vapors may ignite,
resulting in fire or explosion. Be sure to keep all sparks
and flames away from the area while inspecting the
boat’s fuel system.
Step 2: Open the engine compartment and visually check as much
of the fuel system from the tank to the engine as you can
see. If the odor of gasoline is strong or if you see visual evi-
dence of fuel outside the system, cease all operations and
take the boat immediately to an authorized MasterCraft
dealers service department to determine the source of
the leak. The leak must be repaired before the engine is re-
started. Because the lines on late model MasterCraft boats
are pressurized, they can be disconnected and/or removed
ONLY by using specialized tools that are not available to
the public.
e engine box serves as a machinery guard. e en-
gine must be OFF whenever the box is open. Clothing
for body parts can get caught in moving parts, causing
death or serious injury. Keep away from moving parts!
This is important! Fuel leakage can lead to a build-up of
potentially explosive fumes within the engine compartment.
DO NOT IGNORE OR OVERLOOK THIS INSPECTION
AND REPAIR AS NECESSARY!
Inspect the Exhaust
System for Leaks
This function should be performed
prior to starting the engine; and
then again after about three (3)-
to-ve (5) minutes to determine
whether any leaks are apparent.
Step 1: First ensure that the engine is OFF and that the engine
safety starting switch is disconnected. Be certain that the
throttle/shift control lever is in neutral. The engine
must be cool.
e engine box serves as a machinery guard. e en-
gine must be OFF whenever the box is open. Clothing
or body parts can get caught in moving parts, causing
death or serious injury. Keep away from moving parts.
Step 2: Open the engine compartment and visually check the ex-
haust system from the engine to the transom for any obvi-
ous damage to exhaust lines or the mufer.
Step 3: If leakage is apparent, tighten the hose clamps, being careful
to avoid crimping the hose. If the leakage is signicant, or is
occurring at a location other than the joints (such as a split
in a hose), see your authorized MasterCraft dealer’s service
department for parts and service. This is important! Ex-
haust fumes can cause illness or impairment, includ-
ing carbon monoxide poisoning. Equally important
to consider, leakage can lead to a build-up of poten-
tially explosive fumes within the engine compart-
ment. DO NOT IGNORE OR OVERLOOK THIS
INSPECTION! REPAIR AS NECESSARY!
Before Each Use
(After Starting the Engine)
Check at the Battery Is Fully Charged
As the boat is started, check all gauges, but pay particular attention to the
voltmeter.
mastercraft 2010 ow n e r s m anual page 17-2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft csx 220 and is the answer not in the manual?

MasterCraft csx 220 Specifications

General IconGeneral
BrandMasterCraft
Modelcsx 220
CategoryBoat
LanguageEnglish

Related product manuals