The following chart will assist you in nding and correcting minor mechanical and electrical problems with your MasterCraft boat. Engine manuals
include troubleshooting suggestions regarding drive train issues.
To correct a problem, rst determine what the symptom is. Start with the rst cause and eliminate the possibility of each until the problem is
corrected. Due to the specialized skill and tools needed to correct major issues, that information has not been discussed below. If a problem is not
addressed herein, please contact an authorized MasterCraft dealer’s service department.
When experiencing a problem, check the surroundings before shutting down the boat. If a sudden stop would place other boaters in jeopardy,
continue on until it is safe to slow or stop to analyze the situation. Always be aware of the surroundings and how actions may impact other boaters!
Throttle/shifting problems. Corroded cables. Clean and lubricate the cables.
Low transmission oil level. Replenish transmission uid.
Sticking transmission shift detent ball. Clean and lubricate the detent ball.
Kink in cable(s). Have authorized MasterCraft technician
replace the cable(s).
gu i d e to t ro u bles h ooti ng
mastercraft 2010 ow n e r ’s m anual • page 20 -1
To Next Page
Loading...
Need help?
General
