1 GENERAL INFORMATION
1.1 Product description
The Mass Combi Ultra is a multifunctional charger inverter.
It passes through power from an external AC source (e.g. a
generator or shore power connection) to your AC loads and
charges your main batteries.
In addition, it can charge a secondary battery bank with a
dedicated charge algorithm. Solar modules can be
connected for additional power to charge both battery
banks.
1.2 Use of this manual
This manual serves as a guideline for the safe and
effective use and installation of the Mass Combi Ultra, also
called Combi Ultra further in this manual:
For the installer this manual gives directions for the
installation, operation and commissioning.
For the end user, this manual gives directions for the
operation, maintenance and possible correction of
minor malfunctions.
Every person who works with the device should be
familiar with the contents of this manual, and must
carefully follow the instructions contained herein.
Store the manual in an accessible place.
1.3 Validity of this manual
This manual is valid for the following models:
All the specifications, provisions and instructions contained
in this manual apply solely to the Mastervolt-delivered
standard version of a single Mass Combi Ultra.
1.4 Disclaimer
Our products are subject to continual development and
improvement. Therefore, additions or modifications to the
products may cause changes to the technical data and
functional specifications. No rights can be derived from this
document. Please consult our most current Terms &
Conditions of Sale.
1.5 Scope of warranty
Mastervolt assures the product warranty of the Mass
Combi Ultra during two years after purchase, on the
condition that all instructions and warnings given in this
manual are taken into account during installation and
operation.
Among other things, this means that installation is carried
out by a qualified electrician, that installation and
maintenance are executed according to the stated
instructions and correct working sequence, and that no
changes or repairs may have been performed on the Mass
Combi Ultra other than by Mastervolt. The warranty is
limited to the costs of repair and/or replacement of the
product by Mastervolt only.
Costs for installation labour, shipping of the defective parts
and indirect damage are not covered by this warranty. For
making an appeal on warranty you can contact your
supplier directly, stating your complaint, application, date of
purchase and part number / serial number.
1.6 Liability
Mastervolt accepts no liability for:
consequential damage due to use of the Mass Combi
Ultra;
possible errors in the manuals and the results thereof.
use that is inconsistent with the purpose of the product.
1.7 Changes to the Mass Combi Ultra
Changes to the Mass Combi Ultra may be carried out only
after obtaining the written permission of Mastervolt. This is
not applicable for DIP-switches which are used for user
settings.
1.8 Identification label
Figure 1-1: Example of an identification label
The identification label is positioned at the right side of the
Mass Combi Ultra, see figure 1-1.
CAUTION!
Never remove the identification label.
To Next Page
Loading...
