To Next PageTo Next PageWhat to do if my Mastervolt MASS COMBI 12/1600-60 Inverter shows a DC voltage error?
If your Mastervolt Inverter indicates a DC voltage error, which means the battery voltage is either too high or too low, you should check the batteries.
What to do if the DC-fuse is blown in Mastervolt MASS COMBI 12/1600-60?
If the DC-fuse in your Mastervolt Inverter has blown, investigate the cause of the failure and replace the fuse.
Why my Mastervolt MASS COMBI 12/1600-60 Inverter has insufficient quality of AC-in (Shore or Generator)?
If your Mastervolt Inverter has insufficient quality of AC-in (Shore or Generator), you should check the AC wiring, looking for cables that are too thin and/or too long.
What to do if my Mastervolt MASS COMBI 12/1600-60 Inverter's battery temperature is too high?
If your Mastervolt Inverter indicates that the battery temperature is too high, or if the temperature sensor on the battery gives an incorrect value, disconnect the sensor. If the LEDs then turn off, replace the battery temperature sensor.
General| Input Voltage | 12 V |
|---|---|
| Output Power | 1600 W |
| Output Power (VA) | 1600 VA |
| Output Power (W) | 1600 W |
| Output Voltage | 230 V |
| Output Frequency | 50 Hz |
| Frequency | 50/60 Hz |
| Battery Charger Output | 60 A |
| Battery Voltage | 12 V |
| Protection | Overload, short circuit, over temperature, low battery voltage |
