To Next PageTo Next Page
Need help?Do you have a question about the Mastervolt Mass Combi 12/1200-60 and is the answer not in the manual?
General| Output Power | 1200 W |
|---|---|
| Output Voltage | 230 V |
| Frequency | 50 Hz |
| Efficiency | 90% |
| Battery Charger Output | 60 A |
| Transfer Time | 20 ms |
| Protection | Overload, short circuit, over temperature |
| Input Voltage | 12 V |
Specifies correct and incorrect uses of the Mass Combi.
Lists crucial safety measures for installation and operation.
Prohibits use in medical life support systems without agreement.
Warns about battery damage from improper discharge/charging.
Explains AC power management and battery charging modes.
Explains limiting AC input current to prevent overloads.
Describes adding inverter power to AC output with limited input.
Explains how inverter supplies power to specific outputs during low input.
Details operating the main switch for power control.
Outlines various protection mechanisms against faults.
Directs users to chapter 8 for troubleshooting issues.
General guidelines for connecting the unit's wiring.
Details AC wiring requirements, including wire cross-section and colors.
Specifies DC wiring requirements, cable size, and fuse recommendations.
Explains importance and methods for AC safety grounding.
General warnings and notes before making electrical connections.
Step-by-step instructions for various wiring connections.
Explains configuring power sharing to limit AC input current.
Details enabling/disabling power support function.
Explains enabling/disabling generator/mains support function.
Steps for initial setup and verification before operation.
Explains how LEDs indicate failure modes and their causes.
Provides detailed technical specifications for the inverter.
Lists detailed technical specifications for the charger.
