OM-248 440 Page 16
SECTION 6 − REPLACING THE BATTERY
To replace the batteries, re-
move the auto-darkening lens
assembly (see Section 5).
1 Battery Tray
After removing the lens as-
sembly, slide the battery hold-
ing trays out and remove the
old batteries.
Replace with CR2450 lithium
type batteries (2 required) or
equivalent (Miller Part No.
217043).
Be sure Positive (+) side of
the battery faces up (to-
ward inside of helmet).
Reinstall the battery trays. To
test, press the On button. The
display screen should turn on.
Reinstall the lens assembly.
Left and right battery trays
are not interchangeable.
The auto−darkening hel-
met will not work if battery
trays are installed on the
wrong sides.
Be sure Positive
(+) side of battery
faces up.
62V Lens
73V Lens
1
1
To Next Page
Loading...