Matheson Select - Table of Contents

TABLE OF CONTENTS
SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS − READ BEFORE USING 1.....
1-1. Symbol Usage 1
1-2. Arc Welding Hazards 1.......................................................
1-3. Proposition 65 Warnings 2....................................................
1-4. Lens Shade Selection Table 3.................................................
1-5. Principal Safety Standards 3..................................................
SECTION 2 − SPECIFICATIONS 4.....................................................
SECTION 3 − OPERATING INSTRUCTIONS 5..........................................
3-1. Helmet Controls 5...........................................................
3-2. Auto On/Off Button And Low Battery Light (Variable Shade Helmets) 6...............
3-3. Mode Control (Variable Shade Helmets) 7.......................................
3-4. Variable Shade Control (Variable Shade Helmets) 8...............................
3-5. Lens Delay Control (Variable Shade Helmets) 9..................................
3-6. Sensitivity Control (Variable Shade Helmets) 10..................................
3-7. Typical Lens Adjustment Procedure (Variable Shade Helmets) 11....................
SECTION 4 − ADJUSTING HEADGEAR 12.............................................
SECTION 5 − REPLACING THE LENS COVERS 13.....................................
5-1. Replacing Outside Lens Cover On P10, 52F, And 62V Helmets 13...................
5-2. Replacing Outside Lens Covers On 73V Helmets 14..............................
5-3. Replacing Inside Lens Cover 15................................................
SECTION 6 − REPLACING THE BATTERY 16..........................................
SECTION 7 − INSTALLING OPTIONAL MAGNIFYING LENS 17..........................
SECTION 8 − MAINTENANCE 18.....................................................
SECTION 9 − TROUBLESHOOTING 18................................................
SECTION 10 − PARTS LIST 19.......................................................
SECTION 11 − LIMITED WARRANTY 24...............................................