Matrix Audio Designs
21
Special Commands
Keys associated with source selection and on/ off controls are slightly different than the other
function keys.
Source Select:
This key not only switches the listening zone to that particular source device,but it will also
automatically transmit a specified infrared command to that unit.In the case of CD players,
the“play”or“shuffle”function is usually put in this key, so the source begins regular or shuffle
play as soon as the device is selected.
On/ Off:
This key is the only button that can store 2 commands per device.
One command for ON,and the other command for OFF.
Basic Command Keys:
These are associated with the >> << and || buttons.The RC- 10,and KP- 10 keypad only
allows these functions to be processed.
Advanced Command Keys:
These are associated with the KP- 22 keypad,and are labelled 0 through 9 plus a “Disc”and
“Track”button.
Over time you will find that all keys are really programmed with the same sequence of steps,
and can all be programmed at once.To start however,we have broken the procedure down
into two sets of instructions.Once you become familiar with the sequence you will see that
you can follow one set of instructions for all programming.
Each keypad worksheet also contains the programming flowchart for quick reference.
To Next Page
Loading...
