Matrix Audio Designs
42
MRC-8e/8.4e Specifications
Features
• Eight Independent Zones
• Modular Construction
• Easy to program and install
• Programming buttons under the front panel (no external programmer required)
• RS232 port on board to interface with home automation systems
• Trigger inputs/outputs
• Infrared commands stored in flash memory
• High current toroidal power transformer
• Each Zone is separately fused
•Amplifiers are protected from overload and thermal runaway
• Ten button (KP-10e)or Twenty-two button (KP-22e) keypad with IR receiver
• Hand Held Remote control
• Independent volume,Bass,Treble controls per zone
• All Off feature
Technical Information
• Eight independent Zones (2 x Four Zone Modules)
• Eight 20 Watt per channel stereo amplifiers (20Hz to 20Khz @ .1% THD.).
• Four Stereo Inputs,47K impedance
• Four Stereo Looping Outputs
• Infrared learning microprocessor
• Four infrared 3.5mm mono output jacks
• 12VDC, trigger out @ 100 ma. Dry contact N.O.Relay
• 12 VDC trigger input (from external device)
• Switched 120VAC.Outlet 200 Watts
• RS232 Port (9 Pin D connector)
• KeypadWiring: Patent (pending) control technology sharing the
existing or newly installed four conductor speaker wiring
• 17”W x 5”H x 13”D (including feet and connectors)
To Next Page
Loading...