Matrix C7X - 03 User Manual

58
9.8 HANDLEBAR SERVICE
CHAPTER 9: PART REPLACEMENT GUIDE
1) Turn off the power and disconnect the cord from the machine.
2) All items on the handlebar are removed using a Phillips screwdriver from the underside of the bar.
3) Once the screws are removed, lift the part carefully then disconnect any wire connections to fully remove the part. This includes any
resistance, pause / stop buttons, and the heart rate grip plates (Figures A & B).
4) Test the Climb Mill for function as outlined in Section 9.20.
FIGURE A
FIGURE B

Matrix C7X - 03 Specifications

General

Brand	Matrix
Model	C7X - 03
Category	Fitness Equipment
Language	English