25
24
5.10 MANAGER MODE - HARDWARE – TAB 2
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Volume Basic This option controls the default volume on start
up.
Maximum: 30
Minimum: 0
MANAGER MODE
Hardware
CHAPTER 5: MANAGER MODE
5.11 MANAGER MODE - SERVICE
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Service History This option allows the club to record key
components replacement history.
N/A
MANAGER MODE
Service
1) To enter Engineering Mode, press "ENTER, 2, 0, 0, 1, ENTER" on the number keypad and Engineering Mode will appear on the display.
2) Engineering Mode is divided into 12 tabs, located on the left side of the screen. They are General, Workout, Setup Defaults, Network, Asset
Management, Weather, TV, Applications, Calibration, Hardware, Service, Errors.
3) Choose a tab by touching the screen over the desired tab.
4) Each of the tabs has options that will appear once you have chosen that particular tab.
5) Press the "HOME" button or the EMERGENCY STOP to exit Engineering Mode..
6.1 USING ENGINEERING MODE
CHAPTER 6: ENGINEERING MODE
To Next Page
Loading...
Need help?
General
