Matrix C7xi-03 User Manual

145
144
CHAPTER 10: CLIMB MILL SPECIFICATIONS AND ASSEMBLY GUIDE
10.5 TV PROGRAMMING INSTRUCTIONS (US) - CONTINUED
AutoTuning(continued):
7. The achieved scan will be displayed on the bottom left hand corner of the screen (Figure G). Once the channel scan is complete, the
scanned channels will be displayed on the channel list on the screen (Figure H). The scan process is now complete if using a non-Analog signal
source.
8. Select the Analog source on the screen (Figure I). Select your country location (Figure J).
9. Select the signal delivery type on the screen (Figure K). Select the tuner type on the screen (Figure L).
FIGURE JFIGURE I
FIGURE HFIGURE G
FIGURE LFIGURE K
CHAPTER 10: CLIMB MILL SPECIFICATIONS AND ASSEMBLY GUIDE
10.5 TV PROGRAMMING INSTRUCTIONS (US) - CONTINUED
AutoTuning(continued):
10. Press Start Scan to begin scanning (Figure M). Scan Started will be displayed on the bottom left hand corner of the screen (Figure N).
11. The achieved scan will be displayed on the bottom left hand corner of the screen (Figure O). Once the channel scan is complete, the
scanned channels will be displayed on the channel list on the screen (Figure P).
FIGURE PFIGURE O
FIGURE M
FIGURE N

Matrix C7xi-03 Specifications

General

Brand	Matrix
Model	C7xi-03
Category	Fitness Equipment
Language	English