27
26
6.2 ENGINEERING MODE - GENERAL – TAB 1
CHAPTER 6: ENGINEERING MODE
MANAGER MODE
General
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Accumulated Time Total time on the unit since production. Cannot be modified.
Accumulated Distance Total distance on the unit since production. Cannot be modified.
Serial Number - Console This option displays the serial number of
the console. See Service Mode to edit the
serial numbers.
Cannot be modified.
Serial Number - Frame This option displays the serial number of
the Frame. See Service Mode to edit the
serial numbers.
Cannot be modified.
Out of Order This option allows the club to show the unit
"out of order" if an error is present.
True / False
CHAPTER 6: ENGINEERING MODE
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Date & Time This option sets the current date and time of the machine. N/A
ENGINEERING MODE
General
6.2 ENGINEERING MODE - GENERAL – TAB 2
6.2 ENGINEERING MODE - GENERAL – TAB 3
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Time zone This option sets the time zone.
Daylight Saving Time This option sets the daylight time. True or False
Auto Sync Date and Time This option is to set the date and time synchronized with
Microsoft server by internet.
True or False
Screen Timeout This option sets the machine show the
workout time of the machine.
Maximum: 120 sec
Minimum: 15 sec
ENGINEERING MODE
General
To Next Page
Loading...
Need help?
General
