57
56
7.11 SERVICE MODE - HARDWARE – TAB 1
CHAPTER 7: SERVICE MODE
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
ErP This option controls the ErP function is
Disabled or Enabled.
Disabled or Enabled
ErP Timeout Console will enter ErP mode if user does
not touch the screen or press any key pad
for couple minutes.
Maximum: 60
Minimum: 1
Backlight Brightness This option controls the screen backlight. Low / Medium / High
LCM test Write test pattern. N/A
LCM Version Show the LCM software version N/A
LCM Update If new firmware version is higher than the
current one, the "Update" button will show
up and user can hit it to start the process.
N/A
SERVICE MODE
Hardware
7.11
SERVICE MODE - HARDWARE – TAB 2
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Small LCD Reversed This option controls the ErP function is
Disabled or Enabled.
Disabled or Enabled
Play Key Sound Console will enter ErP mode if user does
not touch the screen or press any key pad
for couple minutes.
Maximum: 60
Minimum: 1
Play Workout Countdown Sound This option can set the play workout
countdown to sound on or off.
True or False
Volume Basic This option controls the default volume on
start up.
Maximum: 30
Minimum: 0
SERVICE MODE
Hardware
CHAPTER 7: SERVICE MODE
To Next Page
Loading...
Need help?
General
