Matrix ETERNITY NE User Manual

12 Matrix ETERNITY NE Quick Start
Connecting Extensions
Single Line Telephones (SLT)
• Use standard twisted wire pair cables of good quality with RJ11 plugs to connect the analog
single line telephone instruments to the SLT Ports of ETERNITY NE.
• Place the SLTs, fax machine at the desired locations. Connect the SLTs, Fax machine
to the
wall jacks.
• Plug the RJ11 end of the telephone cables into the SLT Ports of ETERNITY NE.
Terminate the other end of the cables from the SLT Ports on the wall jacks to which the SLTs,
fax machine are connected.
Connecting SIP Extensions
ETERNITY NE supports up to 16 SIP Extensions. You can register SIP enabled devices like an IP
Phone, a Softphone, Analog Telephone Adapter, as SIP Extension of ETERNITY NE.
The first 8 SIP extensions are free. To increase the number of SIP extensions, you will require the IP8
License. Make sure you have a valid Key for this license when connecting more than 8 SIP
Extensions.To know more about Licensing, see “License Management” in the System Manual.
UMTS
LAN Switch/Hub
Ethernet
(WAN)
Mobile WAN
Computer

Matrix ETERNITY NE Specifications

General

Brand	Matrix
Model	ETERNITY NE
Category	PBX
Language	English