Matrix ETERNITY NE - System Configuration and Licensing; Accessing the Jeeves Configuration Interface; System Configuration Methods

Matrix ETERNITY NE Quick Start 25
Accessing Jeeves
ETERNITY NE provides an embedded web server with a graphic user Interface (GUI), Jeeves, for
configuration.
To access Jeeves, you will need to connect a computer to ETERNITY NE.
Connecting a Computer
You may connect a standalone computer to ETERNITY NE or grab any computer connected in the
same LAN as ETERNITY NE.
Connect a standalone computer to ETERNITY NE, when installing the system for the very first time.
You may connect it to a computer in the LAN at a later stage, once you have finished installation and
configuration of the system.
To connect a standalone computer,
• Plug one end of the RJ45 cable supplied into the Ethernet Port of ETERNITY NE. Plug the
other end into the LAN port of the computer.
• Make sure the IP Address of the computer and the Ethernet Port of ETERNITY do not conflict,
and that both are in the same Subnet.
The default IP Address of the Ethernet Port of ETERNITY is: 192.168.1.101
The default Subnet Mask of the Ethernet Port of ETERNITY is: 255.255.255.0
Computer
LAN Port
Ethernet
Port