28 Matrix ETERNITY NE Quick Start
•In Current Password, enter the default SE Password.
•In New Password, enter the new password. All ASCII characters (except Percentage %, Hash
#, Equal to =, Plus +, And &, Backslash \, Less than <, Greater than >, Double Quote ",
Apostrophe ’ and Space) and digits 0 to 9 are allowed.
The new password must be:
• a minimum of 6 characters to a maximum of 12 characters.
• include atleast one upper-case, one lower-case, one number and one special character.
•In Confirm New Password, re-enter the new password to confirm.
• Click Submit. You will be re-directed to the Login page again.
•In Login as select System Engineer and in Password enter the new password.
As this password is meant for restricting access to the SE mode, we strongly recommend you to:
• Keep the password secret.
• Select a complex password that cannot be easily guessed.
• Change the password regularly.
• On successful login, the home page of the System Engineer configuration mode opens.
The left pane shows the links Basic Settings, Advanced Settings, Maintenance and Status.
Basic Settings break down the complexities of configuration and are sufficient to get your
system into operation.
Advanced Settings enable you to configure the advanced features and facilities of ETERNITY
NE.
To Next Page
Loading...
