MTX-ROUTER User Manual
Matrix Electronica S.L Page 35 of 87
Add: Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http://www.mtx-terminals.com Tel:+34-91.560.27.37 Fax:+34+34-91.565.28.65
Use Filter:Disabled by default. Select Enable to open the Wireless MAC Filter。
Filter Mode:
Prevent client listed from accessing the wireless network:If you want to block specific
wireless-equipped PCs from communicating with the router, then keep the default setting, Prevent
PCs listed from accessing the wireless network.
Permit only client listed to accessing the wireless network:If you want to allow specific
wireless-equipped PCs to communicate with the router, then click the radio button next to Permit
only PCs listed to access the wireless network。
Click the Edit MAC Filter List button. Enter the appropriate MAC addresses into the MAC
fields
3.3.2.4 Advance Settings
The Wireless Advanced Settings screen allows you to customize data transmission settings.
In most cases, the advanced settings on this screen should remain at their default values。