MTX-ROUTER User Manual
Matrix Electronica S.L Page 66 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
3.3.8 QoS Setting
3.3.8.1 Basic
Bandwidth management prioritizes the traffic on your router. Interactive traffic (telephony,
browsing, telnet, etc.) gets priority and bulk traffic (file transfer, P2P) gets low priority. The main
goal is to allow both types to live side-by side without unimportant traffic disturbing more critical
things. All of this is more or less automatic.
QoS allows control of the bandwidth allocation to different services, netmasks, MAC
addresses and the four LAN ports.
Uplink (kbps)
：In order to use bandwidth management (QoS) you must enter bandwidth values
for your uplink. These are generally 80% to 90% of your maximum bandwidth.
Downlink (kbps)
：In order to use bandwidth management (QoS) you must enter bandwidth values
for your downlink. These are generally 80% to 90% of your maximum bandwidth.
3.3.8.2 Classify
Netmask Priority
To Next Page
Loading...