MTX-ROUTER User Manual
Matrix Electronica S.L Page 70 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
Cron：The cron subsystem schedules execution of Linux commands. You'll need to use the
command line or startup scripts to actually use this.
802.1x
：A limited 802.1x server needed to fulfill WPA handshake requirements to allow Windows
XP clients to work with WPA.
Routing
：Routing enables the OSPF and RIP routing daemons if you have set up OSPF or RIP
routing in the Advanced Routing page.。
Language
：Set up the router page shows the type of language, including simplified Chinese and
English.
IP Filter Settings (adjust these for P2P)
：If you have any peer-to-peer (P2P) applications running
on your network please increase the maximum ports and lower the TCP/UDP timeouts. This is
necessary to maintain router stability because peer-to-peer applications open many connections
and don't close them properly. Consider using these:
Maximum Ports: 4096
TCP Timeout: 3600 sec
UDP Timeout: 120 sec
3.3.10.2 Keep Alive
Schedule Reboot
You can schedule regular reboots for the router :
Regularly after xxx seconds.
To Next Page
Loading...