MTX-ROUTER User Manual
Matrix Electronica S.L Page 69 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
Protocol
：This feature allows you to manage the router using either HTTP protocol or the HTTPS
protocol
Auto-Refresh
：Adjusts the Web GUI automatic refresh interval. 0 disables this feature completely
Enable Info Site
：Enable or disable the login system information page
Info Site Password Protection
：Enable or disable the password protection feature of the system
information page
Remote Access
：This feature allows you to manage the router from a remote location, via the
Internet. To disable this feature, keep the default setting, Disable. To enable this feature, select
Enable, and use the specified port (default is 8080) on your PC to remotely manage the router. You
must also change the router's default password to one of your own, if you haven't already.
To remotely manage the router, enter http://xxx.xxx.xxx.xxx:8080 (the x's represent the router's
Internet IP address, and 8080 represents the specified port) in your web browser's address field.
You will be asked for the router's password.
If you use https you need to specify the url as https://xxx.xxx.xxx.xxx:8080 (not all firmwares
does support this without rebuilding with SSL support).
SSH Management：You can also enable SSH to remotely access the router by Secure Shell. Note
that SSH daemon needs to be enable in Services
page.
Note
：
If the Remote Router Access feature is enabled, anyone who knows the router's Internet IP
address and password will be able to alter the router's settings.
Telnet Management
：Enable or disable remote Telnet function
To Next Page
Loading...
Need help?
General