MTX-ROUTER User Manual
Matrix Electronica S.L Page 29 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
Choose not bridge to set the port's own properties, detailed properties are as below:
MTU: maximum transfer unit
Multicast forwarding: enable or disable multicast forwarding
Masquerade/NAT: enable or disable Masquerade/NAT
IP Address: set ra0's IP address, and do not conflict with other ports or bridge
Subnet Mask: set the port's subnet mask
Multiple DHCPD: using multiple DHCP service. Click 'Add' in multiple DHCP server to appear
relevant configuration. The first means the name of port or bridge (do not be configured as
eth0), the second means whether to on DHCP. Start means start address, Max means
maximum assigned DHCP clients, Leasetime means the client lease time, the unit is
second, click 'Save' or 'Apply' to put it into effect after setting.
Note: Only configure and click 'Save' can configure the next, can not configure multiple DHCP at
the same time.
3.3.2 Wireless
3.3.2.1 Basic Settings
To Next Page
Loading...
Need help?
General