MTX-ROUTER User Manual
Matrix Electronica S.L Page 71 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
At a specific date time each week or everyday.
Note
：
For date based reboots Cron must be activated. See Management for Cron activation.
3.3.10.3 Commands
Commands：You are able to run command lines directly via the Webinterface.
Run Command
：You can run command lines via the web interface. Fill the text area with your
command and click Run Commands to submit.
Startup
：You can save some command lines to be executed at startup's router. Fill the text area
with commands (only one command by row) and click Save Startup.
Shutdown
：You can save some command lines to be executed at shutdown's router. Fill the text
area with commands (only one command by row) and click Save Shutdown.
Firewall
：Each time the firewall is started, it can run some custom iptables instructions. Fill the
text area with firewall's instructions (only one command by row) and click Save Firewall.
Custom Script
：Custom script is stored in /tmp/custom.sh file. You can run it manually or use
cron to call it. Fill the text area with script's instructions (only one command by row) and click
Save Custom Script.
3.3.10.4 Factory Defaults
Reset router settings：Click the Yes button to reset all configuration settings to their default
values. Then click the Apply Settings button.
Note
：
Any settings you have saved will be lost when the default settings are restored. After
restoring the router is accessible under the default IP address 192.168.1.2 and the default
password admin.
To Next Page
Loading...