MTX-ROUTER User Manual
Matrix Electronica S.L Page 67 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
You may specify priority for all traffic from a given IP address or IP Range.
Check all values and click Save Settings to save your settings. Click the Cancel changes button
to cancel your unsaved changes.
3.3.9 Applications
3.3.9.1 Serial Applications
There is a console port on MTX-ROUTER. Normally, this port is used to debug the router. This
port can also be used as a serial port. The router has embedded a serial to TCP program. The data
sent to the serial port is encapsulated by TCP/IP protocol stack and then is sent to the destination
server. This function can work as a DTU (Data Terminal Unit). Please refer
www.mtx-terminals.com for more information about this product.
Baudrate: The serial port’s baudrate
Databit: The serial port’s databit
Parity: The serial port’s parity
Stopbit: The serial port’s stopbit
Flow Control: The serial port’s flow control type.
Enable Serial TCP Function: Enable the serial to TCP function
Protocol Type: The protocol type to transmit data.
UDP(DTU) – Data transmit with UDP protocol , work as a DTU which has
application protocol and hear beat mechanism.
To Next Page
Loading...