MTX-ROUTER User Manual
Matrix Electronica S.L Page 57 of 87
Add： Alejandro Sanchez 109, 28019 Madrid. ESPAÑA
http：//www.mtx-terminals.com Tel：+34-91.560.27.37 Fax：+34+34-91.565.28.65
You can enable or disable the firewall, filter specific Internet data types,and prevent
anonymous Internet requests,ultimately enhance network security.
Firewall Protection
Firewall enhance network security and use SPI to check the packets into the network.To use
firewall protection, choose to enable otherwise disabled. Only enable the SPI firewall, you can use
other firewall functions: filtering proxy, block WAN requests, etc.
Additional Filters
Filter Proxy: Wan proxy server may reduce the security of the gateway, Filtering Proxy will
refuse any access to any wan proxy server.
Click the check box to enable the function otherwise
disabled.
Filter Cookies: Cookies are the website of data the data stored on your computer.When you interact
with the site ,the cookies will be used. Click the check box to enable the function otherwise
disabled.
Filter Java Applets: If refuse to Java, you may not be able to open web pages using the Java
programming.. Click the check box to enable the function otherwise disabled.
Filter ActiveX: If refuse to ActiveX, you may not be able to open web pages using the ActiveX
programming. Click the check box to enable the function otherwise disabled.
Prevent WAN Request
Block Anonymous WAN Requests (ping): By selecting “Block Anonymous WAN Requests
(ping)” box to enable this feature, you can prevent your network from the Ping or detection of
other Internet users. so that make More difficult to break into your network.
The default state of
this feature is enabled ,choose to disable allow anonymous Internet requests.
Filter IDENT (Port 113): Enable this feature can prevent port 113 from being scaned from
outside. Click the check box to enable the function otherwise disabled.
Block WAN SNMP access: This feature prevents the SNMP connection requests from the WAN.
After Complete the changes, click the Save Settings button to save your changes. Click the
Cancel Changes button to cancel unsaved changes.
To Next Page
Loading...