Matrix SATATYA PARAM NVR8S User Manual

28 Matrix SATATYA NVR Quick Start
3. Now place the Clamp fitted with the Hard Disks on the bottom plate.
NVR3204X/NVR6404X/NVR3204X P2/NVR6404X P2
4. Fix the clamp fitted Hard disks on the bottom plate with screws available at the rear and side
panel.
Maximum torque to be applied for tightening the screws is 3 kgf.cm. Applying more
than specified torque will cause a damage to the HDD and the clamp.
Similar alignment can be done in NVR6408X/NVR6408X P2/NVR9608X P2 with the eight Hard
Disks as shown below.
Hard Disk
Clamp
Top
Cover
Side Panel
Screws
Front
Cover
Bottom
Plate

Matrix SATATYA PARAM NVR8S Specifications

General

Brand	Matrix
Model	SATATYA PARAM NVR8S
Category	Security System
Language	English