Matrix SATATYA NVR Quick Start 49
Time Zone: Select the relevant Time Zone based on the location from the drop-down list.
Date: Set the Date by clicking on the calender icon.
Time: Set the Time in 24 hours format. Enter the time in HH:MM:SS format.
Set: Click Set to save the settings.
Auto Synchronize with NTP Server: Select this check box if you wish to allow synchronization of
the Device Date and Time with that of the NTP Server.
Preferred NTP Server: You can specify the IP Address or Host Name of the Preferred NTP Server
to be used to update and synchronize System’s Real Time Clock periodically at defined time
interval. For example: NIST.
Update: The Update Interval specifies the time period in hours between successive time
synchronizations. Select the desired option from the drop-down list — Every 6 Hours, Every 12
Hours, Every 24 Hours.
The Date and Time of cameras added through ONVIF in the device will be same as set in
the Time and Language page.
Language: Select the required Language from the drop-down list. This will be set as the default
language of the Local as well as Device Client.
• The Language feature is applicable only for NVRX/NVRX P2 variants.
• The other Languages except English must be configured first by Admin Group Users
from the Device Client so that they appear in the Language drop-down list.
• The updated language will be reflected in the Device Client or vise-versa after next
login.
Network
Configure the Network parameters for LAN 1 and LAN 2 as follows:
To Next Page
Loading...
Need help?
General
