21
1/2 scale for one
machine per one time
(around 5gm)
Wax powder set including
1. One big bottle with 1kg wax powder
2. A small bottle for maintenance.
The wax powder set
Parts number : MTOOL-052
Price : US$ 30
MTOOL-052
WAXING PROCEDURE:
WAXING PROCEDURE:
1. Warm deck and belt by walking on treadmill for 3 or more minutes at a
minimum speed of 3 mph (4.8 kph).
2. Turn off and unplug the treadmill.
3. Sprinkle approximately 1/2 scales of wax under the running belt. (It is useful
to lightly blow the wax to the center of the belt.)
4. Turn the unit on and walk the wax in for 3-4 minutes at 1 mph. Walk all over
the belt to ensure smooth wax distribution.
5. Once wax is walked into the belt and deck repeat procedure for checking the
motor current to ensure that the belt and deck are not to worn for wax to
improve the friction.
Be careful to monitor wax buildup on the rollers – too much wax can cause
issues and technicians need to monitor the rollers if they continually wax units.
To Next Page
Loading...
Need help?
General
