Matrix T50x-02 User Manual

44
7.14 Error message 04B0 troubleshooting
Figure A
[Symptom ]
a. MCB no communication received.
[Solution]
a. If the display is giving a 04B0 error, LED DSP2 (RS485) should be light (Figure A). If this light is
not on and a 04B0 error is present, replace the UCB.
b. Check the connection of the console communication cable at both of the console and the MCB.
c. Replace the console communication cable.
d. Replace the MCB.

Matrix T50x-02 Specifications

General

Brand	Matrix
Model	T50x-02
Category	Treadmill
Language	English