Matrix T50x-02 - Incline Motor Jammed; 01 A0 Troubleshooting

49
[Symptom 2 of treadmill will not start ]
If the Incline tube jammed with the bottom or error code “01A0” appear.
[Cause]
Error code 01A0
[Solution]
1. Please release incline tube (Figure A), and turn on the power.
2. After turn on the power, Machine will find BDC (bottom dead center) (Figure B)
3. When Incline stop rotated (on BDC position), rotated the tube to bottom. (Figure C)
4. When tube touch bottom, reverse the tube 2 cycles. (Figure D)
5. Fix the incline tube.
7.19 Incline motor jammed and 01A0 troubleshooting
(Figure A)
(Figure B)
(Figure D)
(Figure C)