67
FIGURE I FIGURE J
FIGURE K
FIGURE L
9) Plug the TV power wire into the TV (Figure I). NOTE: An adaptor may be needed between the power wire and the TV. This adaptor is
shipped with the TV.
10) Plug the TV controller cable into the console (Figure J).
11)PlugtheTVcontrollercableintothebackoftheTV(FigureK).
12) Install the console and TV back covers (Figure L). NOTE: Be sure to route the cables to the TV through the hole in the console back cover
created by removing the Matrix logo plate.
13) Test the TV for function.
10.4 ASSEMBLY INSTRUCTIONS - TV - CONTINUED
CHAPTER 10: TREADMILL SPECIFICATIONS AND ASSEMBLY GUIDE
To Next Page
Loading...
