45
8.5 ERROR MESSAGE TROUBLESHOOTING - CONTINUED
ERROR MESSAGE 0x0441 and 0x0442
1) CAUSE - A command is received from the console with its correct packet, but the Daughter Board has no function to support it (0x0441) or
the received command code from the console is correct and is supported, but it has less or more data arguments.
2) SOLUTION:
a. Power the unit off / on.
b. If the issue is not resolved by a power reset, replace Daughter Board (Figure A).
FIGURE A
CHAPTER 8: TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
