Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Freezer. If not,
please consult a qualified person to correct.
Before switching on!
The freezer must be allowed to stand still with the lid open for at least 12 hours.
DO NOT SWITCH ON UNTIL TWELVE HOURS AFTER MOVING THE FREEZER.
The coolant uid needs time to settle.
Getting Started
Switching on your Freezer
1. Before connecting the Freezer to the mains supply make sure that the thermostat control
dial is set at position in OFF.
2. Turn the thermostat knob clockwise to set it to the desired position, bear in mind that the
MID position is the correct temperature for storing already frozen food.
3. To ensure that the Freezer is cool enough to sufficiently freeze your food wait 24 hours
before filling with food.
Adjusting the Temperature
The internal temperature of your appliance is controlled by a thermostat. MAX Position makes
the appliance colder and is used for fast freezing (see fast freezing section). The recommended
position is between MID but should be adjusted according to its environment. The appliance
may not operate correctly if it is in a particularly hot or cold room or if the lid is opened often or
for prolonged periods.
Thermostat control dial
Fast Freezing
Fresh food should be frozen as quickly as possible. Setting MAX makes your Freezer operate
continually and get colder (approx minus 28°C). It will therefore freeze quicker and retain more
of the goodness in food. Freezing will be complete after 24 hours. Turn the thermostat control
dial back to position MID, to allow the freezer to return to its normal temperature (-18°C). Never
freeze large quantities of fresh food at one time.
Noises inside the Freezer!
If you have not owned a fridge or freezer before, you may notice that it makes some rather
unusual noises.
Most of these are perfectly normal, but you should be aware of them!
POWER
To Next Page
Loading...
