If you have removed the cartridge before it runs out of the staples, the
following condition may occur in the cartridge. Seeing the following,
load the cartridge again.
(1) The staple sheet is exposed from the
cartridge.
In this case, push the staple sheet
into the cartridge.
1. Use MAX genuine staple cartridge “No.70FE.”
2. Do not set the broken and shortened staples into the cartridge or load them into the
machine to reuse them. They could cause a trouble or staple jam.
3. Do not touch the staple sensor or feeding roller of staple when removing staples from the
machine.
13
To Next Page
Loading...
